The latest range of Mountain Top roller shutters (Evo-M & Evo-E) for the new model Ford Ranger (2023 onwards) and the new model VW Amarok (2023 onwards) can fit with factory fitted trim and OEM factory fitted roll bars. For an older model of vehicle,
75kg is the maximum capacity for when the vehicle is moving. The static weight is around double that. For example, if you wanted to pitch a tent onto Mountain Top cross-bars which on top of the roller shutter, and have two adults sleep in it, that wo
Yes, these are universal for all standard Mountain Top roller shutters, not including the new Evo range. https://www.truckman.co.uk/mountain-top-roller-tonneau-lid-screws-plastic-plugs-6-pcs-8rtzsm01c.
The Mountain Top sliding trays have a maximum weight limit of 500kg.
In some cases, pickup truck manufacturers use Mountain Top as their OEM supplier for roller shutters. A genuine Mountain Top roller shutter would have Mountain Top either printed on the roller shutter itself (usually on the right hand/driver’s side)
You'll need an under-rail bed liner to be compatible with a future roller shutter installation.
It's not completely waterproof. However, it designed to prevent water from entering into your truck bed with a drain system that can handle more than 10 gallons of water per minute, it is also fully corrosion resistant and has an automotive grade pow
In some cases yes, but the most important thing you need in your vehicle load bed to make a bed divider compatible are "C-Channels" - these are metal channels on each side rail, usually factory fitted by the vehicle manufacturer. If you are unsure if
Unfortunately none of our roller shutters are ladder rack compatible. You could look at buying one of our hardtops which are ladder rack compatible. This would be either the Classic or Utility hardtop.
If you have an existing load bed liner you will require the Mountain Top Risers Kit.
The EVOm and EVOe locks into place in both open and closed positions. The roller shutter is locked into place on the load bed and is released via a pull strap, so suitable for large loads. Just be aware though, nothing should be touching the metal ca
You'll need a new locking kit, which includes a lock barrel and two keys: https://www.truckman.co.uk/mountain-top-roller-tonneau-replacement-barrel-lock-key-set-m04b-8rtzsm04b.