DECKED is supplied as a bespoke kit, designed to be built up into a full unit into your vehicle. For most vehicles, a small amount of drilling is required to install the brackets, the rest of the installation is relatively straightforward. If your ve
Yes, the DECKED CargoGlide is a purpose designed sliding tray to fit with your DECKED drawer system.
The drawers are the same size in every vehicle - only the top deck is different to match the different vehicle bed sizes. Small Drawer (Left). Larger Drawer (Right).
We have fitted DECKED with the carpet BedRug before. However, we recommend DECKED to be fitted directly to the metal of the vehicle. The constant movement of the drawers can fray and damage the carpet over time.
The top of the DECKED can easily take a weight of a tonne without causing any damage to it. This is because the core of the DECKED is a steel sub frame, making it extremely robust and strong.
The DECKED drawers are designed to extend right over the vehicles tailgate, making it extremely easy to load and unload the drawers.
This can vary slightly, but from floor to top of the DECKED it is approximately 300mm.
There are no dividers available for the top of the DECKED unfortunately. We would recommend a tie down system to go on top of the DECKED. With this in place you may be able to get some kind of divider made.
The 12v socket can be re-routed to sit just inside the ammo box.
There is a small amount of space from the drawers to the end of the load bed/tailgate but this is only very minimal.
Unfortunately, DECKED isn't compatible with any roller shutter. This is mainly because the DECKED would be physically in the way of the mechanism underneath a roller shutter. DECKED is best fitted with a hardtop canopy. If you have a roller shutter a